EaCo Chem - White Scum Presoak
JUMBOTRON
White Scum Presoak is designed as a pre-soak to facilitate the removal of white scum on brick, block, or concrete

Deposit Removal Presoak

  • For Block, and Concrete
  • Powerful Penetrating and Softening of Deposits
  • Can Remove Deposits from CMU
  • Must Follow with NMD80

White Scum Presoak Product Specification | White Scum Presoak SDS/MSDS

White Scum Presoak is designed as a pre-soak to facilitate the removal of white scum on block, brick or concrete. White Scum Presoak followed with NMD 80 can be used to remove calcite from concrete masonry units (CMU).
Used in conjunction with NMD 80, this combination will ensure the complete removal of white scum.

White Scum Presoak provides powerful penetration and softening action of white scum.

First apply the White Scum Presoak undiluted and allow it to dwell on the deposit only for approximately five to ten minutes. Apply NMD 80 using an EC Jet (dilutes four parts water to one part solution (4:1) automatically) without rinsing off the White Scum Presoak; allow a five to ten minute dwell time. Rinse completely with a pressure washer to get the desired results. Repeat as necessary.

Complementary Products

NMD 80
NMD 80 is a buffered detergent-based solution designed for removing mortar smears and efflorescence from new masonry structures. NMD 80 can be used on virtually any type of brick, block, stone, cast stone, precast and glass.

footer

Copyright EaCo Chem Inc. All rights reserved.

Member of the Cast Stone Institute    Mason Contractors Association of America    Member of the Pennsylvania Concrete Masonry Association    Member of the Mid-Atlantic Masonry Association (MAMA)

Facebook  Twitter  Instagram  Google+  Youtube