EC Jet downstream chemical injector for NMD 80 and SOS 50 efflorescence and new construction cleaning equipment
EC Jet downstream chemical injector by EaCo Chem


The EC Jet is a quick coupling attachment to the end of your pressure washer designed to dilute material 4:1 (4 parts water to 1 part chemical). It is primarily used when applying NMD 80 or SOS 50 for new construction clean-up. The EC Jet allows for quick and accurate dilutions while spraying the chemical with the proper nozzle already in place. The open/close valve can also be used to shut off the chemical in-take and allow for rinsing without removing the unit. For best results, a 4 to 6 gallon per minute pressure washer not exceeding 2,000 P.S.I. is recommended.

A contractor applies NMD 80 with an EC Jet low pressure system using a high volume injector nozzle. This efficient system allows the contractor to apply the chemical and water for rinsing without stopping to switch tools.
EC Jet EC Jet downstream chemical injector attachment detail


* A MEG type tip is required for the EC Jet to attach to the tip of the pressure washer wand. If the wand has a NPT tip, an additional attachment will be required

Also available for Pavers!

Click here for EC JET parts list and assembly instructions